Diversitech DP-1 Nitrogen Purge Tool, 1/4 in, Male SAE Flare x Swivel Female SAE Flare, 25 to 35 scfh, Domestic

The Nitrogen Purge Tool is a quick and easy way to purge copper pipes with nitrogen. Then, with a turn of the dial, quickly switch to a very low ow of nitrogen to properly braze the copper. It has a durable aluminum design so you can just throw it into your tool bag when you are done.

Adjustable Dial

• Purge flows rate of 25 to 35 scfh, 19 to 23 lpm (0.03 dia orifice) at 50 psig regulator pressure
• Braze flows rate 3 to 6 scfh, 2 to 3 lpm (0.01 dia orifice) at 50 psig regulator pressure
• 50 psig inlet pressure for proper flows rates
• The purge valve is not a regulator and therefore the output pressure will equal the input pressure when the outlets is blocked
• It is not intended to be used with the outlets blocked
• The user should not weld a completely closed look as the pressure will build
• We recommend removing the Schrader valve and letting it vent
• 7/16 to 20 in thread size

PROP65: This Product Can Expose You To Chemicals, Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For more information go to www.P65Warnings.ca.gov